OSHA Practice Test: 10 & 30 Quiz Questions and Answers (2024)

OSHA Practice Quiz

1.)What should you do if you believe working conditions are unsafe or unhealthful?

  • keep it to yourself and forget about it
  • call the county board of health
  • notify your employer first and then OSHA if necessary
  • go straight to OSHA

2.)Who is required to pay for Personal Protective Equipment (PPE) in most situations?

  • Employer and Employee
  • Employer
  • Employee
  • OSHA

3.)An injury or illness case is work-related if an event or exposure in the work environment either caused or contributed to the resulting condition.

  • True
  • False

4.)How can a worker find out what chemical they use in a product?

  • ask your supervisor
  • look on the label
  • read the SDS
  • all of the above

5.)OSHA inspections are _____________ conducted without advance notice.

  • Almost always
  • Sometimes
  • Never
  • Always

6.)In construction, fall protection is needed at how many feet above a lower level (excluding scaffolds)?

  • 4
  • 5
  • 6
  • 8

7.)How many seconds is it acceptable to stand under a suspended load?

  • 0
  • 1
  • 2
  • 3

8.)What is the most significant hazard facing workers in a trench?

  • hazardous atmospheres
  • falls
  • cave-ins
  • falling objects

9.)What material handling-related injury is known to be the number one cause of workers' compensation claims?

  • workers being struck by falling materials
  • equipment contacting powerlines
  • back injuries
  • none of the above

10.)As an operator, how often should you inspect your piece of mobile equipment

  • the first day of the workweek
  • once a month
  • each day before operation
  • never, the mechanics will do that

OSHA Test Answer Key

1.) "notify your employer first and then OSHA if necessary"

Feedback:

OSHA encourages workers to report unsafe or unhealthy working conditions through their anonymous complaint system. Still, if the issue can be solved in-house by talking to your employer about your concerns, that's the first step you should take. If your employer retaliates against you for bringing up a problem, that is a separate issue that can also be taken to OSHA.

OSHA certainly doesn't want you to keep the problem to yourself. While the county resources may be appropriate for some workplace issues, OSHA is the best authority to call on for problems with workplace safety and health.

2.) "Employer"

Feedback:

In your Introduction to OSHA lesson, you should learn about workers' rights and employers' responsibilities that OSHA enforces. The agency holds employers responsible for giving workers the necessary resources for doing a job safely. That includes paying for required PPE, providing safety training, performing health and safety-related testing, and more.

3.) "True"

Feedback:

Often, there's a clear cause-and-effect relationship between a workplace or job and a specific injury or illness, but sometimes the link is complicated or ambiguous.

According to OSHA, an injury or illness should be considered work-related if it's "more likely than not" that the employee's work duties or environment contributed to the condition.

4.) "all of the above"

Feedback:

OSHA's Hazard Communication Standard (HCS) ensures that workers have access to information about any dangerous chemicals they may be exposed to in the workplace. Containers must be labeled in a specific way, and workplaces must keep a Safety Data Sheet (SDS) accessible to workers. The SDS is full of important information for each substance.

You should receive training on these labels and SDSs, but if you don't know how to find and use the information, your supervisor should have the training to help you. That means "all of the above" is the correct answer.

5.) "Almost always"

Feedback:

There are a number of reasons why OSHA might visit your workplace, but whether it's a routine visit or because they suspect something is wrong, they'll usually show up unannounced.

6.) "6"

Feedback:

Fall protection is one of the areas where OSHA's standards differ by industry and context. Technically, all four choices are correct for someone, which means you'll have to pay close attention to the details to get the answer right.

The question specifies construction work, and 29 CFR 1926 requires fall protection when you're 6 feet above the lower level.

The question excludes scaffolding because, in that case, it's 10 feet.

If this question had been about general industry work, the correct answer would've been 4 feet. Shipyard work would be 5 feet, and longshoring would be 8 feet.

(Don't worry – your OSHA 10 test won't expect you to know the rules for every industry, just your own.)

7.) "0"

Feedback:

The phrasing of this question seems to imply that there is some amount of time where it's safe to stand under a suspended load – it's meant to trick you. Since you should never stand under a suspended load, the answer is 0.

8.) "cave-ins"

Feedback:

It would be best to consider all these hazards when working in a trench. A hazardous atmosphere could build up in the trench. You could fall while climbing in or out, and objects could fall on you from above.

However, the greatest threat is a cave-in.

9.) "back injuries"

Feedback:

Again, all the options are potential hazards for a worker handling materials. That means "none of the above" is the wrong answer.

However, back injuries are far more common for materials handlers than struck-by or electrocution hazards.

10.) "each day before operation"

Feedback:

If you're a mobile equipment operator, you never know what's happening with your equipment when you're not around. The only way to ensure it's in good operating condition is to conduct an inspection each day before you fire it up.

Do You Need OSHA 10 or 30 Training? Enroll Today!

OSHA Practice Test: 10 & 30 Quiz Questions and Answers (2024)

FAQs

How many questions are there on the OSHA 30 final exam? ›

The final exam for the online OSHA 30-Hour course has 100 questions and the online OSHA 10-Hour course has 40 questions. What score do I need to pass an OSHA course? OSHA courses only allow 3 attempts for all checkpoint exams, as well as the final exam. The final exam requires a minimum score of 70% to pass.

How many questions is the OSHA 10 final test? ›

After you complete all course modules, you're required to take a 20-question final exam. You have 180 minutes to earn a passing score of 70% or higher. If you do not pass any given quiz in three tries, you will be locked out of the course and will need to contact our support team to resume your training.

Is the OSHA 30 final exam hard? ›

The difficulty level of the OSHA 30 Hour Test can vary depending on several factors, including the participant's prior knowledge of workplace safety and health, their attention and retention of the course material, and their ability to apply that knowledge in real-world scenarios.

Is the OSHA 10 test hard? ›

The trainee only has to make 70% to pass each quiz and final test, and are allotted up to three times to take and pass each quiz/test. The quizzes and test are not designed to be difficult, but rather are necessary to help ensure the trainee is actively participating in their online OSHA 10-hour construction course.

Is the OSHA 30 exam open book? ›

Yes. OSHAcademy training exceeds the OSHA 30 general outreach training as each course in this program has individual quizzes, knowledge checks, and an open book final exam. This helps to ensure you thoroughly understand the content.

How many times can you fail OSHA quiz? ›

Students are required to take a quiz at the end of each lesson within a course. They have 3 attempts to pass the quiz at a 70% or better passing grade.

What happens if you fail OSHA 10 quiz? ›

Students need to score at least 70% to pass end-of-module quizzes and the final exam. If you do not pass a section quiz or the final exam after three attempts, you will be disqualified from the course. After a disqualification, you will need to re-register for the course and purchase it again to continue your training.

What happens if you fail the OSHA 30 test? ›

You will be given three attempts to pass an exam and must score at least 70%. If you receive a failing grade three times on any one exam, it is considered a course failure. To retake the exam, you need to register for a new course and start from the beginning.

How long is your OSHA 10 good for? ›

How Long is OSHA 10 Good For, When Required? It depends on the local law or individual employer, but three to five years is common. The OSHA 10 renewal requirement is 5 years in Connecticut, Miami, and Philadelphia.

Is OSHA 30 harder than OSHA 10? ›

The 10 and 30 refers to the duration of the training in hours. Obviously, the 30-hour course is a much more extensive course than the 10-hour one. That's because OSHA 30 is for supervisor-level personnel.

How long does OSHA 30 really take? ›

Students can spend a max of 7.5 hours with the course material per day (instructional time), and there have to be at least 8 hours between long sessions. Obviously, you'll usually have more than eight, but that's the minimum. That means an OSHA 30 course has to be spread out over at least 4 days.

Is there a study guide for OSHA 30? ›

Our comprehensive study guides cover important points from your 30-hour OSHA course, so that you can easily study for your final exam and have a valuable resource to refer to long after your course is complete. The study guide is provided in the form of a downloadable PDF, so you will receive it instantly.

How many quizzes are in OSHA 10? ›

OSHA Outreach Testing

The federal OSHA portion of the course includes nine end-of-module quizzes and a final exam. You have up to three attempts to pass each quiz with a score of 70% or higher.

Does OSHA 10 look good on resume? ›

Can I Add OSHA Certification to My Resume? Even though OSHA does not consider 10- or 30-Hour Outreach training to be a certification, employers and hiring managers may look for these courses in the certifications section of your resume.

How long does it actually take to finish OSHA 30? ›

How long does it take to complete OSHA 30? It takes four days to complete OSHA 30, which includes 30 hours of in-depth training on workplace safety and health topics. Because OSHA limits training sessions for this course to 7.5 hours per day, it is not possible to complete your training in less than four days.

How long is each OSHA 30 module? ›

All modules in OSHA 30-hour General Industry must be at least 30 minutes long. Some topics, like Introduction to OSHA and Managing Safety and Health, must be at least 2 hours in length. Other topics, like Walking and Working Surfaces, are required to be at least an hour.

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Ouida Strosin DO

Last Updated:

Views: 5737

Rating: 4.6 / 5 (56 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Ouida Strosin DO

Birthday: 1995-04-27

Address: Suite 927 930 Kilback Radial, Candidaville, TN 87795

Phone: +8561498978366

Job: Legacy Manufacturing Specialist

Hobby: Singing, Mountain biking, Water sports, Water sports, Taxidermy, Polo, Pet

Introduction: My name is Ouida Strosin DO, I am a precious, combative, spotless, modern, spotless, beautiful, precious person who loves writing and wants to share my knowledge and understanding with you.